DT 240S 15mm E-Thru Endcaps For 20mm HubConvert DT Swiss 20mm front hubs to the new 15mm E-thru axle standard.... |
|
|||
|
DT 240S 9mm End Caps For 20mm HubConvert DT Swiss 240s 20mm axle front hubs to 9mm. pair DT Swiss part number HWGXXX0001917S Thru-bolt or RSW is not included, please purchase seperately... |
|
||
DT 240S Thru-Bolt AdapterConvert DT Swiss 240s hubs to accept DT Thru-Bolt oversize skewers.... |
|
|||
|
DT Aerolite Spoke HolderDT Swiss DT Aerolite Spoke Holder for use during wheel builds to help install spokes.... |
|
||
|
DT Brass NipplesDT 12mm Brass Nipples are quality brass nipples that would be a fitting part of any wheel build. 32 brass nipples weigh approximately 30 grams Material Cold forged and machined Brass Spoke Diameter: 1.8 mm Unit of Sale: Box of 10... |
|
||
|
DT Proline T/E/N/S/I/O Spoke TensiometerTools don't come any better than this. The precise gauge helps ensure your wheels are built with a high, even tension. This is a super high quality, professional level tool recommended for shop use and pro mechanics.... |
|
||
|
DT Revolution 2.0/1.5 Silver SpokesBuild the ultimate set of wheels for your race machine with DT Swiss' Revolution super-butted spokes. 2.0mm (14g) on the threaded end so they accept standard spoke nipples, narrow 1.5mm section in the middle to save rotating weight. Box of 72 spok... |
|
||
|
DT Swiss Proline Soldering WireDT Swiss ProLine soldering wire 15.8meters Special for stainless spokes... |
|
||
|
DT Swiss 12mm NipplesDT Swiss Alloy or Brass Nipples 12mm available in a variety of colors. 32 alloy nipples weigh approximately 10 g(alloy), 30 g(brass) Cold forged and machined Spoke Diameter: 1.8 mm, 2.0 mm Unit of Sale: Box of 100 Weight: 312.5 mg(allo... |
|
||
|
DT Swiss 16mm Spoke NipplesDT Swiss 1.8 x 16mm Silver Alloy Nipples, Box of 100 Item Specifications Color Silver Comments Cold forged and machined Spok... |
|








